How engineering works.

Clear explanations with interactive examples. Diagrams simplify reality and do not control any real equipment.

Electrical calculator

Calculate current and power and scale a 4–20 mA signal.

INTERACTIVE EXAMPLESIMULATION

The principle

For an ohmic DC circuit, I = V / R and P = V × I. For balanced three-phase loads, real power P = √3 × line voltage × line current × power factor. A linear 4–20 mA scale represents (I − 4) / 16 of the configured range.

An example

12 V across 6 Ω gives 2 A and 24 W. For a 0–100 °C range, 12 mA represents 50 °C.

Important

The three-phase formula assumes a balanced load and a known power factor. These calculations do not constitute a design or safety check.

Technical source / documentation ↗