AUTOMOTIVE TECHNOLOGY
Brake calculations
Calculate brake force, mass and left/right imbalance. Also compare reaction distance, braking distance and total stopping distance with an ideal speed-time graph.
Who communicates with whom?
Select Roller tester for four wheel forces and a reference mass, or Braking distance for an ideal stopping model. Neither connects to a real brake tester.
Voltage and waveform
Units matter: 1 daN = 10 N. The roller example shows a = sum F / m and the Dutch RDW relative braking convention of 10 × sum F / m, read as percent. This differs from 100 × F / (m × 9.81). Correct mass and measurement procedure are part of the assessment.
Measuring with an oscilloscope
A bar chart compares the four wheel forces. Axle imbalance is (highest − lowest) / highest × 100%. The other graph shows constant speed during reaction followed by a linear reduction at constant deceleration.
The principle
The roller example illustrates the service-brake calculation for vehicles with a maximum permitted mass no greater than 3,500 kg. Use registered running-order mass, or unladen mass + 100 kg if the former is absent. An APK decision also needs the applicable table, pedal force and measurement conditions. Plate-tester and heavy-vehicle extrapolation methods are not simulated. For stopping distance: v = km/h ÷ 3.6, sreaction = v × treaction, sbrake = v² / (2a), and kinetic energy = ½mv².
An example
Wheel forces of 3,000, 2,800, 2,000 and 1,800 N at 1,500 kg total 9,600 N, a = 6.4 m/s² and relative braking 64%. Front imbalance is about 6.67% and rear imbalance 10%. At 50 km/h, one second reaction and a = 6 m/s², ideal stopping distance is approximately 29.96 m. Doubling speed doubles reaction distance and quadruples braking distance.
Important
These are educational calculations, not a brake test or APK approval. Force values are examples. The stopping model assumes constant deceleration and omits brake buildup, ABS control, fade, gradients and changing grip. Do not use it to determine a safe following distance or diagnose a particular vehicle.