INTERACTIVE TOOLS
Scope signal library
Compare schematic CAN and RS-485 waveforms and inspect the channel difference.
The principle
An oscilloscope plots voltage against time. CAN_H and CAN_L are commonly viewed against the same reference; their difference distinguishes dominant from recessive. RS-485 is measured differentially; idle voltage and polarity depend on transceiver and biasing.
An example
Select CAN or RS-485, then switch between normal, missing termination and a stuck line. The waveform is intentionally schematic.
Important
These drawings are not diagnostic thresholds. Never clip a grounded scope lead indiscriminately to a floating or mains conductor; use suitable differential equipment.